상세 정보 |
|||
색: | 색상은 사용자의 요구에 따르면 거나 회색빛입니다 | 판매 수명: | 12개월 |
---|---|---|---|
재료: | 실리콘 실란트 | 포장: | 카트리지마다 또는 필요에 따라 고객에 의해 300 밀리람베르트의 순적량에서 싸여집니다 |
주요 단어: | 전자적 결합 포팅 방수제 | 특징: | 1 파트, 우수한 절연 성능과 화확적 안정성 |
하이 라이트: | 인더스트리얼 실리콘 Sealant,300ml 전자적 실리콘 밀봉제를 쏜 300 밀리람베르트 산업적 실리콘 밀봉제,300ml electronic silicone sealant |
제품 설명
Electronic Bonding Potting Sealant Industrial Silicone Sealant
Product Feature
Single-component room temperature moisture-curing silicone sealant;
Excellent high temperature and low temperature elasticity after curing;
Excellent electrical insulation performance and chemical stability, resistant to breakdown and corrosion;
Good adhesive sealing, which can effectively prevent the infiltration of water and powder;
Compliance with EU RoHS standards and CE certification.
Application Field
Protection potting of small electronic components;
Protection potting of module;
Protection potting of LED photoelectric display (screen);
Bonding and waterproof sealing of electronic appliances and communication equipment.
Technical Parameters Before and After Curing (not to be considered as a product standard)
No. |
Item |
Typical Technical Indicators |
Test Method |
Before curing |
|||
1 |
Appearance |
Fluid or semi-fluid |
/ |
2 | Density (g/cm3) | 1.25 | GB/T 13477 |
3 | Track free time (min) | 20~30 | |
After curing (after 14 days at 23 ± 2 ° C, humidity 50 ± 5% ) | |||
4 | Appearance | Elastomer Rubber | / |
5 | Hardness (Shore A) | 40 | GB/T 531 |
6 | Tensile strength (MPa) | 1.8 | GB/T 528 |
7 | Elongation at break (%) | 200 | |
8 | Volume resistivity (Ω·cm) | 1.0×1014 | GB/T 1692 |
9 | Breakdown voltage strength (kV/mm) | 18 | GB/T 1695 |
Colour
The color is gray or according to the user's needs.
Packing Specification
Packed in a net capacity of 300ml per cartridge or as required by the customer.
Storage
Store in a cool, dry and ventilated place. The storage period is 12 months from the date of manufacture.
Use Limit
It should not be used in dense and non-ventilated places, not suitable for continuous water immersion, and can not be used as the structural sealant. When the material surface is lower than 4 °C or exceeds 50 °C, it is not suitable for application.
Instructions
Surface treatment
The substrate surface should be dry clean and free from rust, dust and oil, etc.; the cleaning solvents that can be used include isopropyl alcohol and acetone; the majority of the substrate is perfectly bonded except PTFE, polypropylene, polyethylene and similar materials.
Bonding
The sealant is squeezed onto the cleaned surface with a sealant gun to make it evenly distributed; if the potting position is deep, the time for complete curing will be prolonged; if the temperature is lower, the curing time will be prolonged.
Primer
In order to achieve the best bonding effect, it is recommended to apply the special primer from Guibao Company; the surface of the substrate is treated with a solvent, and the primer is dipped, painted or sprayed on the surface of the substrate to form a film; the silicone sealant is
applied to the surface of the substrate; the special application is carried out in three steps of drying, humidification and high temperature drying to ensure the stability of silicone sealant curing.
Safety Instructions
Avoid contact with eyes before curing; if contact with eyes, please rinse with plenty of water and consult a doctor; uncured products should avoid contact with children; ventilation should be observed in the application and curing area.
당신의 메시지에 들어가십시오